Arctic Cat’s F-Series is in a new chassis for 2007. There are three versions of the F-Series: F-Standard, F-LXR and F-Sno Pro. Each version has engine options that bring the trail performance model count to 11.
All the models are built on the new Twin Spar chassis and identified easily in new styling. All of the sleds use the Arctic Cat Diamond Drive to move forward, as well as backward this year thanks to a new push-button reverse system. A standard package is just as it sounds, with performance suspensions and basic IFP gas shocks, rider forward design and centralized mass for improved handling.
The LXR package, built for performance touring, has the same shocks and calibration in the suspensions, but adds the Infinite Rider Positioning seat, handlebar and windshield adjustment package. There is also a large trunk in the rear.
The adjustable ergonomics are on the Sno Pro, too, minus the adjustable windshield. The Sno Pro comes with a shorter windscreen with a more aggressive look to match its rough-trail attitude.
All of the F-Series models have 15- by 128-inch Camoplast tracks with 1-inch lugs.
Front Suspension: AWS VII; Shocks/Travel: Fox FLOAT/9.5 Inches; Rear Suspension: Slide Action; Shocks/Travel: Fox 2-inch diameter IFP rear arm shock, ACT IFP front arm/13.5 inches; Features: The Sno Pro version of the front suspension includes Fox FLOAT shocks with an air-adjustable spring rate on the front end that makes bottoming the suspension almost impossible.
1000 EFI Laydown
Cat’s new big-bore displaces 999cc, which is good for a 168 hp claim. Throttle bodies with 50 mm bores feed the engine its fuel, which uses less than the former 900 Suzuki twin. Twin spark plug-heads, 3D ignition and an engine knock sensor are used in this engine to produce 120 pound-feet of torque at 7200 rpm. The large torque spec required a new four-tower clutch for proper calibration.